1m Flexible Rod with single push fit button anodized orange with 12mm co-polymer diameter flexible rod. Ideal for use when powersweeping flexible liners and metal chimney systems.
1m Superflexible Rod with single push fit button anodized green with 8mm co-polymer diameter flexible rod. Ideal for use when cleaning biomass appliances or where added flexibitliy is required for sweeping tight 90 degree bends.
Not for use with mole brushes or larger FlueBoss heads.
1m Rigid Rod with single push fit button anodized Grey with 16mm co-polymer diameter rod. Ideal for use when powersweeping clay and pumice chimney systems.
1m Rigid Rod with single push fit button anodized Black with 18mm co-polymer diameter rigid rod. Ideal for use when powersweeping larger inglenook chimney systems.
FlueBoss® Nylon small suitable for use on flexible liners and metal flues (head diameter 300mm)
FlueBoss® Nylon Large to use on larger diameter chimneys (head diameter 500mm)
FlueBoss XL Nylon is designed for larger flues where there can be more crevices and a higher build up soot deposits. Head Diameter 500mm.
For removing heavy deposits of cresote and tar (overall head diameter 300mm when rotating).
Not suitable for metal chimneys or liners
Liner powersweeping kit designed for sweeping of Flexi lined Metal chimneys systems without damaging the surface.
Kit Contents
10 x 1 metre 12mm Flexi rods, 1 x Drill connector, 1 x FlueBoss Nylon small, 3 metre length of FlueBoss Nylon, Heavy duty rod bag, Free large & small Van Sticker included
1m Rigid Rod with single push fit button anodized red with 14mm co-polymer diameter rod. Ideal for use when powersweeping clay liners chimney systems.
Kit Contents
10 x 1 metre 14mm, Flexible rods, 1 x Drill connector, 1 x FlueBoss Nylon Large, 1 x Cable loop small, 3 metre length of FlueBoss Nylon, Heavy duty rod bag, Free large & small Van Sticker included
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary
Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel and then enameled. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirements of BSEN ISO 28706 - 1:2011.
• Robust
• Friction Fit (No Fire Cement required)
• Versitile and capable of satisfying the demands of most installations
• Continuity and Quality
• Bends - Designed to angle the flue pipe run where necessary